AOR SDU-5000 Manual de Instruções descarregar pdf (Página 31)

In this chapter, we learn how to use the SDU5600 with the AR5000 receiver.

Before proceeding, please review Connection to a Receiver in Chapter 3 of this manual.

Turn on the power to the AR5000.

7-1 Using the SDU5600 with the AR5000 receiver

After turning on the power to the SDU5600, an opening message will be displayed.

You will need to select the receiver that is used with the SDU5600. To select the receiver,

enter the configuration menu by the following steps:

1. Press the [FUNC] key and press the [4] key.

2. Press the [RX] key on the left of the Special function keys.

3. Rotate the rotary dial encoder to select the AR5000 and press the [ENT] key.

[Example]

We are setting the SDU5600 with the AR5000 to the following parameters:

Receive Frequency : 80.00000 MHz

Receive Mode: AUTO

Frequency Step: 100.000 KHz

RF Attenuator: OFF

1. Receive Frequency

• Press the [Center Frequency] key on the Special function keys.

• Enter [ 8 ] [ 0 ] [MHz] from the numeric keys.

2. Receive Mode

• Press the [MODE] key on the numeric keys.

• Rotate the rotary dial encoder and select [AUTO].

• Press the [ENT] key.

(When the [AUTO] is selected, the frequency step will be set to 100 KHz

automatically.)

3. RF Attenuator

• Press the [ATT] key.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Sem comentários

AOR SDU-5000 Manual de Instruções Página 31