AOR AR2700 Manual do Utilizador descarregar pdf (Página 6)

Command Codes/Instructions

A full list of AR8200 commands is quite extensive and it has not been practicable

to include them in this manual. They are available in printed format from

ourselves (large SAE) or can be downloaded from the AOR (UK) Ltd. web site at

http://www.aoruk.com in a PDF format file (cc8200.pdf)

Squelch Detect

When using software to control the AR8200 it is necessary for the software to

know when the AR8200 has stopped on an active channel. This is generally

referred to as Squelch Detect and some software uses software detect whilst

others require/can be selected for hardware detect. The latter usually allows for

faster scanning. The JAV-232 can be used with hardware detection (DCD) and

some packages will allow you to choose which type of Squelch Detect method

you wish to use or the Interface used.

Discriminator Output

For those interested in Data decoding Pin 5 from the Output 5-pIn Din plug or the

mono socket on the right hand side provides the FM Discriminator output from

the AR8200 when connected to the remote socket. This has no effect on any

aspect of the JAV-232’s performance.

5-DIN PLUG OUTPUT

When using the AR-8200 with the JAV-232 and connected via the OS-8200/DIN

the lower 5-Din DIN socket provides outputs as follows:-

Pin 1 & 2: These provide an Open & Close circuit when the Squelch

Opens/Closes for remote tape record operations. In other words if

you have a tape recorder with a remote facility it will turn this on/off

each time the squelch opens.

Pin 3: Ground

Pin 4: Provides constant Audio for use with a Tape Recorder

Pin 5: FM Discriminator Output

Connections required for the

Optoelectronics Scout™

Using suitable software the JAV-232 can be used as a interface for downloading

the memory contents of the Optoelectronics Scout. The Scout™ uses the Icom CI-

V protocol and a simple lead is required between the Scout and the JAV-232.

All that is required is a simple lead between the receiver and the JAV-232 using

the DIN plug on the top of the JAV-232 with the connections exactly the same as

for Icom CI-V earlier other than the plug required on the Scout is 2.5mm.

7-DIN Plug connections 2.5mm Mono Jack

on JAV-232 For Icom CI-V connection

with the Scout™

DIN PLUG

Pin 1: Data into the Computer from the Scout

Pin 2: Data out from the Computer to Scout

Pin 3: Ground

Pin 4 No Connection

Pin 5: No Connection

Pin 6: No Connection

Pin 7: No Connection

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

AOR AR2700 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Recetor AOR AR2700