AOR AR-STV Especificações descarregar pdf (Página 13)

Step: Select the search frequency step. (Entry range: 2 ~ 10 MHz)

To change the parameter, perform the same procedures as the start frequency entry.

Noise Level: Select the noise threshold level. (Entry range: -30 ~ -80 db min 5 dB increments)

Suggested level: 75 (for normal search)

0 (for weak signal)

Run: Select the search bank enable or disable.

To change the parameter, perform the same procedures as the start frequency entry

Video Level: Select the video threshold level. (Entry range: 0 ~ 95 %)

Suggested level: 60 (for normal search)

20 (for weak signal)

If the parameter is set to 0, then the AR-STV searches with the noise level setting.

3. To exit from this setting screen, press and hold the MODE key for 3 seconds.

5-2-2 Memory mode

In the Memory mode, you can change the memory channel setting, record images into memory.

To use this function, a formatted SD memory card (not included) must be inserted in the SD slot.

To go into the Memory mode, press the MODE key and REC key simultaneously.

(If no SD memory card is in the slot, a beep will sound and a “SD Card No File” error message

appears.)

Memory mode screen:

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

AOR AR-STV Especificações Página 13